After Boot up, Place your master media into DVD-ROM(Top Drive) and Blank Media into Writer, Use [UP]/[DOWN] button move to "Select Source" And press [Ent] to select the function Use [UP] or [DOWN] button to DVD-ROM And press [Ent] to select Press [ESC] back to "Select Source" then use [UP] or [DOWN] bitton move to "Copy" for Disc to Disc Copy

After Boot up, If you have no stored image in hard drive please view HOW TO LOAD DISC to HARDDRIVE first, Use [UP]/[DOWN] button move to "Select Source" And press [Ent] to select the function Use [UP] or [DOWN] button to Hard Drive And press [Ent] to select Press [ESC] back to "Select Source" Press [ESC] back to main menu then use [UP] or [DOWN] bitton move to "Copy" for HardDrive to Disc Copy

After Boot up, Place your master media into DVD-ROM(Top Drive) Use [UP]/[DOWN] button move to "Image" And press [Ent] to select the function Use [UP] or [DOWN] button move to "Image Src Drive" And press [Ent] to select Use [UP] or [DOWN] button move to "DVD-ROM" And press [Ent] to select the DVD-ROM as image src drive Press [ESC] back to sub menu Use [UP] or [DOWN] button move to "Load"

After Boot up, Use [UP]/[DOWN] button move to "Image" And press [Ent] to select the function Use [UP] or [DOWN] button move to "Select Image" And press [Ent] to select function Use [UP] or [DOWN] button move to desired iamge partition (Default A) And press [Ent] to select the partition Press [ESC] twice back to main menu When copy from Hard Drive Partition user need to pre-select the proper partition before copy

After Boot up, Use [UP]/[DOWN] button move to "System" And press [Ent] to select the function Use [UP] or [DOWN] button move to "DVD Burning Speed" And press [Ent] to select Use [UP] or [DOWN] button move to desired speed And press [Ent] to make selection Press [ESC] twice back to main menu

After Boot up, Use [UP]/[DOWN] button move to "System" And press [Ent] to select the function Use [UP] or [DOWN] button move to "CD Burning Speed" And press [Ent] to select Use [UP] or [DOWN] button move to desired speed And press [Ent] to make selection Press [ESC] twice back to main menu

After Boot up, Use [UP]/[DOWN] button move to "System" And press [Ent] to select the function Use [UP] or [DOWN] button move to "Audio Burning Speed" And press [Ent] to select Use [UP] or [DOWN] button move to desired speed And press [Ent] to make selection Press [ESC] twice back to main menu

Verify is to examine if the target DVDs can be read correctly after copy

Compare is to make a comparison between the source DVD and the target DVDs after copying

After Boot up, Use [UP]/[DOWN] button move to "System" And press [Ent] to select the function Use [UP] or [DOWN] button move to "System info" And press [Ent] to view firmware version Press [ESC] twice back to main menu

After Boot up, Use [UP]/[DOWN] button move to "System" And press [Ent] to select the function Use [UP] or [DOWN] button move to "Device info" And press [Ent] to select the function Use [UP] or [DOWN] button move between Drive And press [Ent] to select Drive to view Drive firmware version Press [ESC] three times back to main menu